TECHNICAL DATA :
| Material | : | Brass as per IS 319 Also available in AI./S.S./M.S. |
| Plating | : | Nickel Standard Chrome on request |
| Entry Threads | : | BSC Standard Also available in PG/Metric/NPT/BSP/ET |
| Sealing Rubber Ring | : | Neoprene |
| Gland Standard | : | BS 6121 |
| Ingress Protection | : | IP-65 as per IS/IEC 60529:2001 |
| Test Cert. No. | : | CIMFR/TC/P/H/419( Dt. 04.09.2012) |
| Series | : | HC GW |
APPLICATION :
These Glands are used under most climatic conditions and are used in corrosive conditions when protected by a shroud.
PARTS OF GLANDS :
- Brass Check Nut
- Rubber Washer
- Brass Gland Body
- Rubber Inner Seal
- Brass Armour Clamping Cone
- Brass Armour Clamping Ring
- Brass Armour Clamping Nut
- Rubber Outer Seal
- Brass Compression Nut
All Metal Parts are accurately machined for ease of assembly.
| Suitable Cable overall Dia. (mm) | A Dia | B Dia | C (A / F) | D (A / C) | E Nipple Entry Thread | F Length | Product Code | ||
|---|---|---|---|---|---|---|---|---|---|
| From | To | mm | mm | mm | mm | Inch | mm | mm | |
| 6.0 | 13.0 | 14.0 | 12.0 | 24.0 | 28.0 | 3/4″ | M20 | 13.0 | HCGW01SS |
| 13.0 | 16.5 | 18.0 | 14.05 | 25.0 | 29.0 | 3/4″ | M20 | 15.0 | HCGW01S |
| 16.5 | 18.5 | 19.5 | 14.5 | 27.0 | 31.5 | 3/4″ | M20 | 15.0 | HCGW01 |
| 16.5 | 18.5 | 19.5 | 18.0 | 27.0 | 31.5 | 1″ | M25 | 15.0 | HCGW01A |
| 18.5 | 20.0 | 21.0 | 18.0 | 31.0 | 36.5 | 1″ | M25 | 15.0 | HCGW02 |
| 18.5 | 20.0 | 21.0 | 14.5 | 31.0 | 36.5 | 3/4″ | M20 | 15.0 | HCGW02A |
| 20.0 | 23.0 | 24.0 | 18.0 | 31.0 | 36.5 | 1″ | M25 | 15.0 | HCGW03 |
| 23.0 | 26.0 | 27.5 | 20.0 | 37.0 | 44.0 | 1″ | M25 | 15.0 | HCGW04 |
| 23.0 | 26.0 | 27.5 | 24.0 | 37.0 | 44.0 | 1.1/4″ | M32 | 15.0 | HCGW04A |
| 26.0 | 30.0 | 31.0 | 25.0 | 41.0 | 47.0 | 1.1/4″ | M32 | 15.0 | HCGW05 |
| 26.0 | 30.0 | 31.0 | 26.0 | 41.0 | 47.0 | 1.1/2″ | M40 | 15.0 | HCGW05A |
| 30.0 | 33.0 | 34.0 | 31.0 | 46.0 | 54.0 | 1.1/2″ | M40 | 15.0 | HCGW06 |
| 30.0 | 33.0 | 34.0 | 27.0 | 46.0 | 54.0 | 1.1/4″ | M32 | 15.0 | HCGW06A |
| 33.0 | 37.0 | 38.0 | 31.0 | 51.0 | 59.0 | 1.1/2″ | M40 | 15.0 | HCGW07 |
| 37.0 | 41.0 | 42.5 | 39.0 | 56.0 | 64.5 | 2″ | M50 | 15.0 | HCGW08 |
| 41.0 | 46.0 | 47.0 | 39.5 | 59.0 | 67.0 | 2″ | M50 | 20.0 | HCGW09 |
| 46.0 | 52.0 | 53.0 | 44.0 | 66.0 | 76.5 | 2″ | M50 | 20.0 | HCGW010 |
| 46.0 | 52.0 | 53.0 | 48.0 | 66.0 | 76.5 | 2.1/2″ | M63 | 20.0 | HCGW010A |
| 52.0 | 54.0 | 58.0 | 56.0 | 74.0 | 85.0 | 2.1/2″ | M63 | 20.0 | HCGW011S |
| 54.0 | 61.0 | 61.0 | 56.0 | 80.0 | 92.0 | 2.1/2″ | M63 | 20.0 | HCGW011 |
| 61.0 | 66.0 | 68.0 | 64.0 | 84.0 | 97.0 | 3″ | M75 | 20.0 | HCGW012 |
| 66.0 | 72.0 | 73.0 | 67.0 | 90.0 | 103.0 | 3″ | M75 | 20.0 | HCGW013A |
| 72.0 | 78.0 | 80.0 | 74.0 | 99.0 | 113.0 | 3.1/4″ | M75 | 20.0 | HCGW013 |
| 78.0 | 84.0 | 80.0 | 74.0 | 98.0 | 113.0 | 3.1/4″ | M82 | 20.0 | HCGW014 |
| 84.0 | 94.0 | 97.0 | 90.5 | 117.0 | 135.0 | 4″ | M100 | 20.0 | HCGW015 |
| 94.0 | 104.0 | 106.0 | 102.0 | 130.0 | 150.0 | 4.1/2″ | M110 | 20.0 | HCGW016 |