Category: Cable Gland

TECHNICAL DATA :

Material	:	Brass as per IS 319 Also available in AI./S.S./M.S.
Plating	:	Nickel Standard Chrome on request
Entry Threads	:	BSC Standard Metric also available in PG/BSC/NPT/BSP/NT
Sealing Rubber Ring	:	Synthetic / Natural
Gland Standard	:	IS 12943 : 2005
Ingress Protection	:	IP-65 as per IS/IEC 60529:2001
Test Cert. No.	:	CIMFR/TC/P/H/420( Dt. 04.09.2012)
Series	:	HC SCG

APPLICATION :

Single Compression Glands are used under regular climatic conditions. These are Whether Proof and may be used in corrosive conditions when protected by a shroud.

PARTS OF GLANDS :

• Brass Check Nut
• Brass Gland Body
• MS Washers (3 Nos.)
• Rubber Outer Seal
• Brass Compression Nut

All Metal Parts are accurately machined for ease of assembly.

ACCESSORIES :
Shrouds and earth tags are supplied separately and should be specified when ordering the Gland.

Suitable Cable overall Dia. (mm)		D1 Nipple Entry	D2 Dia	D3 Dia	D4 (A/F)	D2 (A/C)	L1 Length	Product Code
From	To	Thread mm	mm	mm	mm	mm	mm
9.0	12.0	16	12	16	22	25.5	9	HCSCG-1
12.0	15.0	16	12	18.5	25	29	9	HCSCG-2
12.0	15.0	20	15	18.5	25	29	9	HCSCG-3
15.0	18.0	20	15	24	30	34.5	9.5	HCSCG-4
16.O	20.O	25	20.5	24	31.5	36	9.5	HCSCG-5
20.0	24.0	25	20.5	28.5	35	40	10	HCSCG-6
24.0	28.0	32	27	33	40	46	12	HCSCG-7
28.O	32.O	40	34	37	46	53	12	HCSCG-8
33.0	37.0	40	34	41	50	57.5	12	HCSCG-9
37.0	42.0	50	44	47	58	67	13	HCSCG-10
43.0	48.O	50	44	52	65	75	13	HCSCG-11
49.0	54.0	63	55	61.5	73	84	14	HCSCG-12
55.0	60.0	63	55	65	77	89	14	HCSCG-13
61.0	66.0	75	68	71	85	98	15	HCSCG-14
67.0	72.0	75	67	76	90	104	15	HCSCG-15
73.0	78.0	82	73	82	97	112	17	HCSCG-16
79.0	84.O	90	81	91	108	124	19	HCSCG-17
84.5	92.0	100	91	98	117	135	20	HCSCG-18
93.0	100.0	110	100	107	127	146	25	HCSCG-19
101.0	115.0	125	113	118	142	164	25	HCSCG-20

NOTE: Pitch of threads is 1.5 mm.

TECHNICAL DATA :

Material	:	Brass as per IS 319 Also available in AI./S.S./M.S.
Plating	:	Nickel Standard Chrome on request
Entry Threads	:	BSC Standard Also available in PG/Metric/NPT/BSP/ET
Sealing Rubber Ring	:	Neoprene
Gland Standard	:	BS 6121
Ingress Protection	:	IP-65 as per IS/IEC 60529:2001
Test Cert. No.	:	CIMFR/TC/P/H/419( Dt. 04.09.2012)
Series	:	HC GW

 

APPLICATION :

These Glands are used under most climatic conditions and are used in corrosive conditions when protected by a shroud.

 

PARTS OF GLANDS :

• Brass Check Nut
• Rubber Washer
• Brass Gland Body
• Rubber Inner Seal
• Brass Armour Clamping Cone
• Brass Armour Clamping Ring
• Brass Armour Clamping Nut
• Rubber Outer Seal
• Brass Compression Nut

All Metal Parts are accurately machined for ease of assembly.

Suitable Cable overall Dia. (mm)		A Dia	B Dia	C (A / F)	D (A / C)	E Nipple Entry Thread		F Length	Product Code
From	To	mm	mm	mm	mm	Inch	mm	mm
6.0	13.0	14.0	12.0	24.0	28.0	3/4″	M20	13.0	HCGW01SS
13.0	16.5	18.0	14.05	25.0	29.0	3/4″	M20	15.0	HCGW01S
16.5	18.5	19.5	14.5	27.0	31.5	3/4″	M20	15.0	HCGW01
16.5	18.5	19.5	18.0	27.0	31.5	1″	M25	15.0	HCGW01A
18.5	20.0	21.0	18.0	31.0	36.5	1″	M25	15.0	HCGW02
18.5	20.0	21.0	14.5	31.0	36.5	3/4″	M20	15.0	HCGW02A
20.0	23.0	24.0	18.0	31.0	36.5	1″	M25	15.0	HCGW03
23.0	26.0	27.5	20.0	37.0	44.0	1″	M25	15.0	HCGW04
23.0	26.0	27.5	24.0	37.0	44.0	1.1/4″	M32	15.0	HCGW04A
26.0	30.0	31.0	25.0	41.0	47.0	1.1/4″	M32	15.0	HCGW05
26.0	30.0	31.0	26.0	41.0	47.0	1.1/2″	M40	15.0	HCGW05A
30.0	33.0	34.0	31.0	46.0	54.0	1.1/2″	M40	15.0	HCGW06
30.0	33.0	34.0	27.0	46.0	54.0	1.1/4″	M32	15.0	HCGW06A
33.0	37.0	38.0	31.0	51.0	59.0	1.1/2″	M40	15.0	HCGW07
37.0	41.0	42.5	39.0	56.0	64.5	2″	M50	15.0	HCGW08
41.0	46.0	47.0	39.5	59.0	67.0	2″	M50	20.0	HCGW09
46.0	52.0	53.0	44.0	66.0	76.5	2″	M50	20.0	HCGW010
46.0	52.0	53.0	48.0	66.0	76.5	2.1/2″	M63	20.0	HCGW010A
52.0	54.0	58.0	56.0	74.0	85.0	2.1/2″	M63	20.0	HCGW011S
54.0	61.0	61.0	56.0	80.0	92.0	2.1/2″	M63	20.0	HCGW011
61.0	66.0	68.0	64.0	84.0	97.0	3″	M75	20.0	HCGW012
66.0	72.0	73.0	67.0	90.0	103.0	3″	M75	20.0	HCGW013A
72.0	78.0	80.0	74.0	99.0	113.0	3.1/4″	M75	20.0	HCGW013
78.0	84.0	80.0	74.0	98.0	113.0	3.1/4″	M82	20.0	HCGW014
84.0	94.0	97.0	90.5	117.0	135.0	4″	M100	20.0	HCGW015
94.0	104.0	106.0	102.0	130.0	150.0	4.1/2″	M110	20.0	HCGW016

HEX DOUBLE COMPRESSION WEATHER PROOF CABLE GLANDS AS PER BS 6121 WITH IP 66 as per IS 13947 for Unarmored Cables

TECHNICAL DATA:

Material: Brass (IS 319) Standard, (Ali./S.S/M.S also available) Ref Standard: BS 6121

Plating: Nickel Plated Standard (Tin/Cadmium/Chrome also available)

Entry Thread: B.S Cond Standard Application: Generally for outdoor & indoor use for Unarmored Cables.

Ingress Protection: IP 66 as per IS 13947

 

APPLICATION

Unarmored glands are used in regular climatic conditions, which are water proof & dust proof (IP66) with the protection of PVC hood it can be used in different areas.

PARTS OF GLAND

1) Check Nut 2) Washer
3) Nipple Entry Part, 4) Neoprene outer Rubber
5) Main Gland Body 6) Neoprene outer Rubber
7) Skid Washer 8) Gland Cover

As all the metal parts are modes of brass, as per the approved drawing.

ACCESSORIES:

PVC Hood, Earth tag, Stopping Plug, Reducers, Adaptors, etc are available with specified dimensions in accordance to the gland, separately.

ASSEMBLY SEQUENCE:

a) Insert part no. 8,7,6,5 & 4 respectively on the outer sheath of the cable.
b) Insert part no. 3 on outer sheath, then tight part no. 3 with part No.5, & tight part no. 8 with part no. 5.
c) Finally apply the full fitted gland in the enclosure with the entry thread provided, if the enclosure does not have thread than tight the gland with the part no.1 provided

TECHNICAL DATA :

Material	:	Brass as per IS 319 Also available in AI./S.S./M.S.
Plating	:	Nickel Standard Chrome on request
Entry Threads	:	Metric Standard Also available in BSC/PG/NPT/BSP/ET
Sealing Rubber Ring	:	Neoprene
Gland Standard	:	BS 6121
Ingress Protection	:	Flame Proof testing As per IS/IEC-60079-1:2007 Whether Proof testing as per IS/IEC 60529 : 2001 (IP-66)
Test Cert. No.	:	CIMFR/TC/P/H 492 (Dt. 08.02.2013)
Series	:	HC GFIIC

APPLICATION :

These Glands are used in hydrogen gas/vapours area as well as in climatic conditions which are weatherproof, waterproof and dustproof (IP 66). They may be used in corrosive conditions when protected by a shroud.

 

PARTS OF GLANDS :

• Brass Check Nut
• Rubber Entry Seal Ring
• Brass Gland Body
• Rubber Inner Seal
• Brass Armour Clamping Cone
• Brass Armour Clamping Ring
• Brass Armour Clamping Nut
• Rubber Outer Seal
• Nylon Skid Washer
• Brass Compression Nut

All Metal Parts are accurately machined for ease of assembly.

Suitable Cable overall Dia. (mm)		A Dia	B Dia	C (A / F)	D (A / C)	E Nipple Entry Thread		F Length	Product Code
From	To	mm	mm	mm	mm	Inch	mm	mm
6.0	13.0	14.0	12.0	21.0	24.5	3/4″	M20	25.0	HCGFIIC01SS
13.0	16.5	18.0	14.05	25.0	29.0	3/4″	M20	25.0	HCGFIIC01S
16.5	18.5	19.5	14.5	27.0	31.5	3/4″	M20	25.0	HCGFIIC01
16.5	18.5	19.5	18.0	27.0	31.5	1″	M25	25.0	HCGFIIC01A
18.5	20.0	21.0	18.0	31.0	36.5	1″	M25	25.0	HCGFIIC02
18.5	20.0	21.0	14.5	31.0	36.5	3/4″	M20	25.0	HCGFIIC02A
20.0	23.0	24.0	18.0	31.0	36.5	1″	M25	25.0	HCGFIIC03
23.0	26.0	27.5	20.0	37.0	44.0	1″	M25	25.0	HCGFIIC04
23.0	26.0	27.5	24.0	37.0	44.0	1.1/4″	M32	25.0	HCGFIIC04A
26.0	30.0	31.0	25.0	41.0	47.0	1.1/4″	M32	25.0	HCGFIIC05
26.0	30.0	31.0	26.0	41.0	47.0	1.1/2″	M40	25.0	HCGFIIC05A
30.0	33.0	34.0	31.0	46.0	54.0	1.1/2″	M40	25.0	HCGFIIC06
30.0	33.0	34.0	27.0	46.0	54.0	1.1/4″	M32	25.0	HCGFIIC06A
33.0	37.0	38.0	31.0	51.0	59.0	1.1/2″	M40	25.0	HCGFIIC07
37.0	41.0	42.5	39.0	56.0	64.5	2″	M50	25.0	HCGFIIC08
41.0	46.0	47.0	39.5	59.0	67.0	2″	M50	25.0	HCGFIIC09
46.0	52.0	53.0	44.0	66.0	76.5	2″	M50	25.0	HCGFIIC010
46.0	52.0	53.0	48.0	66.0	76.5	2.1/2″	M63	25.0	HCGFIIC010A
52.0	54.0	58.0	56.0	74.0	85.0	2.1/2″	M63	25.0	HCGFIIC011S
54.0	61.0	61.0	56.0	80.0	92.0	2.1/2″	M63	25.0	HCGFIIC011
61.0	66.0	68.0	64.0	84.0	97.0	3″	M75	25.0	HCGFIIC012
66.0	72.0	73.0	67.0	90.0	103.0	3″	M75	25.0	HCGFIIC013A
72.0	78.0	80.0	74.0	98.0	113.0	3.1/4″	M82	25.0	HCGFIIC013
78.0	84.0	85.0	78.0	105.0	121.0	3.1/2″	M90	25.0	HCGFIIC014
84.0	94.0	97.0	90.5	117.0	135.0	4″	M100	25.0	HCGFIIC015
94.0	104.0	106.0	102.0	130.0	150.0	4.1/2″	M110	25.0	HCGFIIC016

TECHNICAL DATA :

Material	:	Brass as per IS 319 Also available in AI./S.S./M.S.
Plating	:	Nickel Standard Chrome on request
Entry Threads	:	Metric Standard Also available in BSC/PG/NPT/BSP/ET
Sealing Rubber Ring	:	Neoprene
Gland Standard	:	BS 6121
Ingress Protection	:	Flame Proof testing As per IS/IEC-60079-1:2007 Whether Proof testing as per IS/IEC 60529 : 2001 (IP-66)
Test Cert. No.	:	CIMFR/TC/P/H 834 (Dt. 21.03.2014)
Series	:	HC GF

APPLICATION :

These Glands are used in flammable gas/vapours area as well as in climatic conditions which are weatherproof, waterproof and dustproof (IP 66). They may be used in corrosive conditions when protected by a shroud.

 

PARTS OF GLANDS :

• Brass Check Nut
• Rubber Washer
• Brass Gland Body
• Rubber Inner Seal
• Brass Armour Clamping Cone
• Brass Armour Clamping Ring
• Brass Armour Clamping Nut
• Rubber Outer Seal
• Brass Compression Nut

All Metal Parts are accurately machined for ease of assembly.

Suitable Cable overall Dia. (mm)		A Dia	B Dia	C (A / F)	D (A / C)	E Nipple Entry Thread		F Length	Product Code
From	To	mm	mm	mm	mm	Inch	mm	mm
6.0	13.0	14.0	12.0	24.0	28.0	3/4″	M20	25.0	HCGF01SS
13.0	16.5	18.0	14.05	25.0	29.0	3/4″	M20	25.0	HCGF01S
16.5	18.5	19.5	14.5	27.0	31.5	3/4″	M20	25.0	HCGF01
16.5	18.5	19.5	18.0	27.0	31.5	1″	M25	25.0	HCGF01A
18.5	20.0	21.0	18.0	31.0	36.5	1″	M25	25.0	HCGF02
18.5	20.0	21.0	14.5	31.0	36.5	3/4″	M20	25.0	HCGF02A
20.0	23.0	24.0	18.0	31.0	36.5	1″	M25	25.0	HCGF03
23.0	26.0	27.5	20.0	37.0	44.0	1″	M25	25.0	HCGF04
23.0	26.0	27.5	24.0	37.0	44.0	1.1/4″	M32	25.0	HCGF04A
26.0	30.0	31.0	25.0	41.0	47.0	1.1/4″	M32	25.0	HCGF05
26.0	30.0	31.0	26.0	41.0	47.0	1.1/2″	M40	25.0	HCGF05A
30.0	33.0	34.0	31.0	46.0	54.0	1.1/2″	M40	25.0	HCGF06
30.0	33.0	34.0	27.0	46.0	54.0	1.1/4″	M32	25.0	HCGF06A
33.0	37.0	38.0	31.0	51.0	59.0	1.1/2″	M40	25.0	HCGF07
37.0	41.0	42.5	39.0	56.0	64.5	2″	M50	25.0	HCGF08
41.0	46.0	47.0	39.5	59.0	67.0	2″	M50	25.0	HCGF09
46.0	52.0	53.0	44.0	66.0	76.5	2″	M50	25.0	HCGF010
46.0	52.0	53.0	48.0	66.0	76.5	2.1/2″	M63	25.0	HCGF010A
52.0	54.0	58.0	56.0	74.0	85.0	2.1/2″	M63	25.0	HCGF011S
54.0	61.0	61.0	56.0	80.0	92.0	2.1/2″	M63	25.0	HCGF011
61.0	66.0	68.0	64.0	84.0	97.0	3″	M75	25.0	HCGF012
66.0	72.0	73.0	67.0	90.0	103.0	3″	M75	25.0	HCGF013A
72.0	78.0	80.0	74.0	98.0	113.0	3.1/4″	M82	25.0	HCGF013
78.0	84.0	85.0	78.0	105.0	121.0	3.1/2″	M90	25.0	HCGF014
84.0	94.0	97.0	90.5	117.0	135.0	4″	M100	25.0	HCGF015
94.0	104.0	106.0	102.0	130.0	150.0	4.1/2″	M110	25.0	HCGF016

TECHNICAL DATA :

Material	:	Brass as per IS 319
Plating	:	Nickel
Entry Threads	:	BSC / ET
Series	:	HDC

APPLICATION :

These Glands are used under most climatic conditions and are used in corrosive conditions when protected by a shroud.

 

PARTS OF GLANDS :

• Brass Check Nut
• Rubber Washer
• Brass Gland Body
• Rubber Inner Seal
• Brass Armour Clamping Cone
• Brass Armour Clamping Ring
• Brass Armour Clamping Nut
• Rubber Outer Seal
• Brass Compression Nut

All Metal Parts are accurately machined for ease of assembly.

ACCESSORIES :

Shrouds and earth tags are supplied separately and should be specified when ordering the Gland. 25.0

Suitable Cable overall Dia. (mm)		Gland Size		A Dia	B Dia	E Nipple Entry	F Length	Product Code
From	To	Inch	mm	mm	mm	Thread mm	mm
6.0	9.0	3/8″	10.0	10.0	7.0	5/8″	25.0	HDC – 3/8″
6.0	12.0	1/2″	12.0	13.5	11.0	5/8″	25.0	HDC – 1/2″
12.0	16.5	5/8″	16.0	16.5	14.0	3/4″	25.0	HDC – 5/8″
16.5	18.5	3/4″	19.0	19.0	14.0	3/4″	25.0	HDC – 3/4″
18.5	20.0	7/8″	22.0	20.0	14.0	3/4″	25.0	HDC – 7/8″
20.0	23.0	1″	25.0	23.5	19.0	1″	25.0	HDC – 1″
23.0	26.0	1 1/8″	28.0	27.0	22.5	1 1/8″	25.0	HDC – 1 1/8″
26.0	30.0	1 1/4″	32.0	32.0	25.5	1 1/4″	25.0	HDC – 1 1/4″
30.0	33.0	1 3/8″	35.0	35.0	27.5	1 1/2″	25.0	HDC – 1 3/8″
33.0	37.0	1 1/2″	38.0	38.0	31.0	1 1/2″	25.0	HDC – 1 1/2″
37.0	41.0	1 3/4″	45.0	44.5	42.0	2″	25.0	HDC – 1 3/4″
41.0	46.0	2″	50.0	51.0	42.0	2″	25.0	HDC – 2″
46.0	52.0	2 1/4″	57.0	57.0	50.0	2 1/4″	25.0	HDC – 2 1/4″
52.0	54.0	2 1/2″	63.0	63.0	54.5	2 1/2″	25.0	HDC – 2 1/2″
54.0	61.0	2 3/4″	70.0	69.5	62.0	2 3/4″	25.0	HDC – 2 3/4″
61.0	72.0	3″	75.0	75.0	65.0	3″	25.0	HDC – 3″
72.0	78.0	3 1/4″	82.0	82.0	74.5	3 1/4″	25.0	HDC – 3 1/4″
78.0	84.0	3 1/2″	88.0	88.0	78.0	3 1/2″	25.0	HDC – 3 1/2″
84.0	94.0	4″	100.0	98.0	87.0	4″	25.0	HDC – 4″

TECHNICAL DATA :

Material	:	Brass as per IS 319
Plating	:	Nickel Standard Chrome on request
Entry Threads	:	BSC Standard Metric also available
Sealing Rubber Ring	:	Synthetic / Natural
Series	:	HC

APPLICATION :

Single Compression Glands are used under regular climatic conditions. These are Whether Proof and may be used in corrosive conditions when protected by a shroud.

PARTS OF GLANDS :

• Brass Check Nut
• Brass Gland Body
• MS Washers (3 Nos.)
• Rubber Outer Seal
• Brass Compression Nut

All Metal Parts are accurately machined for ease of assembly.

ACCESSORIES :

Shrouds and earth tags are supplied separately and should be specified when ordering the Gland.

Suitable Cable overall Dia. (mm)		Nipple Entry Thread		Cable Gland Dimensions							Product Code
From	To	Inch.	mm	A	B	C	D	E	F	G
12.0	10.0	3/8″	10	11.5	12.5	15.5	7.5	20.5	18.0	2.5	HC – 3/8″
15.0	10.0	1/2″	12	12.0	15.0	15.5	8.5	25.0	22.0	3.0	HC – 1/2″
16.0	10.0	5/8″	16	14.5	16.5	16.5	8.0	24.0	21.0	2.5	HC – 5/8″
16.5	14.0	3/4″	19	14.5	17.5	19.0	8.5	26.0	23.0	2.5	HC – 3/4″
17.5	16.5	7/8″	22	14.5	20.0	18.5	8.5	29.0	25.0	3.0	HC – 7/8″
20.5	18.5	1″	25	20.5	23.0	25.0	9.0	33.0	29.0	3.0	HC – 1″
27.5	22.5	1-1/8″	28	24.0	28.0	28.5	10.5	40.0	35.0	3.5	HC – 1-1/8″
27.5	26.5	1-1/4″	32	27.0	32.0	31.5	11.0	46.0	40.0	3.5	HC – 1-1/4″
33.0	29.6	1-3/8″	35	29.5	35.5	34.5	11.0	50.0	44.0	4.0	HC – 1-3/8″
37.0	33.5	1-1/2″	38	33.0	39.5	38.0	11.5	54.0	47.0	4.0	HC – 1-1/2″
40.0	37.5	1-3/4″	45	40.0	44.5	44.0	11.5	62.0	54.0	4.5	HC – 1-3/4″
43.0	43.5	2″	50	45.0	51.5	50.0	13.0	69.0	60.0	5.0	HC – 2″
52.0	49.0	2-1/4″	57	51.5	58.0	56.5	13.0	78.0	68.0	5.0	HC – 2-1/4″
56.0	64.5	2-1/2″	63	57.5	62.5	63.0	14.0	82.0	72.0	5.0	HC – 2-1/2″
67.0	61.5	2-3/4″	70	63.5	69.0	69.0	15.0	90.0	80.0	5.0	HC – 2-3/4″
73.0	66.5	3″	75	68.0	75.0	75.0	16.0	99.0	87.0	5.5	HC – 3″
74.0	72.5	3-1/4″	82	75.0	81.5	82.0	16.0	105.0	92.0	6.0	HC – 3-1/4″
83.0	80.5	3-1/2″	88	81.5	86.5	88.0	16.0	115.0	102.0	6.0	HC – 3-1/2″
95.0	84.0	4″	100	92.0	101.0	100.0	17.0	126.0	110.0	6.5	HC – 4″
108.0	100.0	4-1/2″	112	107.0	109.0	105.0	20.0	148.0	129.5	7.5	HC – 4-1/2″

TECHNICAL DATA :

Material	:	Brass as per IS 319
Plating	:	Natural
Entry Threads	:	BSC/ET
Series	:	HGF

 

APPLICATION :

Flange type Glands are mainly used for armoured cables and are very easy and comfortable in fitting and give a strong grip to hold the cable. All the electricity boards and reputed firms use these types of Cable Glands.

PARTS OF GLANDS :

• Brass Check Nut
• Brass Strip with MS Bolts
• Brass Center Part
• Brass Gland Body
• MS Nut (2 Nos.)

All Metal Parts are accurately machined for ease of assembly.

ACCESSORIES :

Shrouds and earth tags are supplied separately and should be specified when ordering the Gland.

Suitable Cable overall Dia. (mm)		Nipple Entry Thread		Cable Gland Dimensions								Product Code
From	To	Inch.	mm	A	B	C	D	E	F	G	H
12.0	16.0	5/8″	16	12.5	17.0	15.5	13.0	45.0	28.0	2.5	3.0	HGF 5
16.0	18.0	3/4″	19	15.0	20.0	18.5	14.0	54.0	29.0	2.5	3.0	HGF 4
18.0	21.0	3/4″	19	06.0	21.0	19.5	15.0	55.0	30.0	2.5	3.0	HGF 3
21.0	25.0	1″	25	21.0	26.0	25.0	16.0	60.0	36.5	2.5	3.0	HGF 2
25.0	29.0	1.1/4″	32	27.0	32.0	31.5	17.0	65.0	43.0	3.0	4.0	HGF 1
29.5	33.0	1.3/8″	35	31.5	35.5	35.0	17.0	74.0	50.0	3.5	4.5	HGF 11
33.O	35.0	1-1/2″	38	33.5	37.5	37.5	20.0	76.0	51.5	3.5	4.5	HGF 0
35.0	38.0	1-1/2″	38	33.5	40.0	38.0	20.0	77.0	52.0	3.5	4.5	HGF 00
38.0	41.0	1-3/4″	45	37.5	43.0	41.0	18.0	84.0	56.0	3.5	4.5	HGF 38
41.0	45.0	1-3/4″	45	43.0	49.5	46.0	20.0	92.0	66.0	4.0	5.0	HGF 001
45.0	52.0	2″	50	49.0	53.5	53.0	20.5	96.0	68.5	4.0	5.0	HGF 002
52.0	59.0	2.1/4″	57	56.0	61.0	59.5	22.0	106.0	78.0	4.0	5.0	HGF 003
59.0	67.0	2.1/2″	63	60.5	65.0	65.0	22.0	114.0	81.5	4.0	5.0	HGF 0033
67.0	76.0	3″	75	69.5	75.5	75.0	22.0	135.0	95.5	4.5	5.5	HGF 004
76.0	84.0	4″	100	92.5	96.5	98.5	25.0	158.0	114.0	5.5	6.5	HGF 005

TECHNICAL DATA :

Material	:	Brass as per IS 319
Plating	:	Nickel Standard Chrome on request
Entry Threads	:	Metric Standard Also available in BSC/PG/NPT/BSP/ET
Sealing Rubber Ring	:	Nitrile/Neoprene/Natural
Gland Standard	:	BS 6121
Ingress Protection	:	IP3X
Series	:	HBW

APPLICATION :

For use with an armoured or braided cable, provides mechanical cable retention and electrical continuity via armoured wire termination. These Glands are mainly used in dry and indoor conditions.

 

DESIGN FEATURES :

3 part armour lock with cone and lock ring provided for additional grip to the armour.

Also available in CIEL (Cast Integral Earth Lug). For orders add ‘C’ to Prod. Code.

Size	Cable Dimensions Accommodate		Gland Dimensions					Product Code
	Under Armour Dia.	Overall Dia.	ISO Entry Thread		Approx length from shoulder	Hexagone Size
	A-Max. mm	B Max. mm	Dia D mm	Length E mm	F mm	G mm	H mm
16 S	8.00	12.00	M16	9.00	20.00	20.00	22.00	HBW – 16 S
16 L	8.60	13.50	M16	9.00	20.00	20.00	22.00	HBW – 16 L
20 S	12.30	17.00	M20	9.00	20.00	22.00	24.00	HBW – 20 S
20 L	14.30	20.00	M20	9.50	20.00	25.00	27.00	HBW – 20 L
25 S	19.00	23.25	M25	9.50	22.00	31.00	34.00	HBW – 25 S
25 L	20.40	27.00	M25	9.50	22.00	33.50	37.00	HBW – 25 L
32 S	23.50	28.50	M32	9.50	25.00	35.00	38.50	HBW – 32 S
32 L	26.50	33.50	M32	9.50	25.00	40.00	45.00	HBW – 32 L
40 S	31.00	37.50	M40	12.50	25.00	44.50	49.00	HBW – 40 S
40 L	33.00	41.50	M40	12.50	25.00	48.50	54.00	HBW – 40 L
50 S	39.50	48.00	M50	12.50	28.00	56.50	63.50	HBW – 50 S
50 L	44.00	54.00	M50	12.50	30.00	61.00	68.00	HBW – 50 L
63 S	50.50	60.50	M63	14.00	33.00	69.50	77.00	HBW – 63 S
63 L	56.00	65.00	M63	14.00	33.00	75.50	84.50	HBW – 63 L
75 S	62.50	72.00	M75	14.00	40.00	83.50	93.00	HBW – 75 S
75 L	67.50	78.50	M75	14.00	40.00	89.50	99.00	HBW – 75 L
90 S	75.00	85.00	M90	20.00	48.00	100.00	110.00	HBW – 90 S
90 L	78.00	88.50	M90	20.00	48.00	102.00	115.00	HBW – 90 L

TECHNICAL DATA :

Material	:	Brass as per IS 319
Plating	:	Nickel Standard Chrome on request
Entry Threads	:	Metric Standard Also available in BSC/PG/NPT/BSP/ET
Sealing Rubber Ring	:	Nitrile/Neoprene/Natural
Gland Standard	:	BS 6121
Ingress Protection	:	IP66
Series	:	HCW

APPLICATION :

For use with armoured or braided cable. Provides environmental seal on the cable outer sheath. Also provides mechanical cable retention and electrical continuity via armoured wire termination. These Glands are mainly used in outdoor and indoor conditions.

DESIGN FEATURES :

4 part armour lock with cone and lock ring provided for additional grip to the armour.

Also available in CIEL (Cast Integral Earth Lug). For orders add ‘C’ to Prod. Code.

Size	Cable Dimensions Accommodate		Gland Dimensions					Product Code
	Under Armour Dia.	Overall Dia.	ISO Entry Thread		Approx length from shoulder	Hexagone Size
	A-Max. mm	B Max. mm	Dia D mm	Length E mm	F mm	G mm	H mm
16 S	8.00	11.00	M16	10.00	40.00	20.00	23.00	HCW – 16 S
16 L	9.00	13.00	M16	10.00	40.00	20.00	23.00	HCW – 16 L
20 S	12.50	15.00	M20	10.00	42.00	22.00	24.00	HCW – 20 S
20 L	14.30	19.00	M20	10.00	42.00	26.00	29.00	HCW – 20 L
25 S	14.80	23.60	M25	10.00	44.00	31.00	34.00	HCW – 25 S
25 L	20.70	27.00	M25	10.00	44.00	34.90	38.00	HCW – 25 L
32 S	26.50	31.00	M32	10.00	46.00	41.00	45.70	HCW – 32 S
32 L	27.00	32.50	M32	10.00	46.00	41.25	46.00	HCW – 32 L
40 S	31.70	37.00	M40	13.50	50.00	55.00	50.00	HCW – 40 S
40 L	33.25	39.00	M40	13.50	50.00	49.00	54.00	HCW – 40 L
50 S	39.80	46.00	M50	14.00	57.00	56.00	62.70	HCW – 50 S
50 L	44.00	50.00	M50	14.00	57.00	62.30	69.50	HCW – 50 L
63 S	50.50	59.00	M63	14.00	70.00	72.50	81.00	HCW – 63 S
63 L	56.00	62.00	M63	14.00	61.00	76.00	85.00	HCW – 63 L
75 S	62.70	71.00	M75	15.00	65.00	85.00	95.00	HCW – 75 S
75 L	67.90	77.50	M75	15.00	66.00	91.00	103.00	HCW – 75 L
90 S	76.00	84.00	M90	20.00	80.00	100.00	110.00	HCW – 90 S
90 L	78.00	89.00	M90	20.00	82.00	103.00	114.00	HCW – 90 L

TECHNICAL DATA :

Material	:	Brass as per IS 319
Plating	:	Nickel Standard Chrome on request
Entry Threads	:	Metric Standard Also available in BSC/PG/NPT/BSP/ET
Sealing Rubber Ring	:	Nitrile/Neoprene/Natural
Gland Standard	:	EN 50262
Ingress Protection	:	IP66
Series	:	HC2

APPLICATION :

For use with all unarmoured cables with rubber outer sheath. Secures outer sheath of the cable. The displacement seal concept makes it suitable for Indoor and Outdoor applications.

DESIGN FEATURES :

Outer displacement seal.

Size	Cable Dimensions Accommodate		Gland Dimensions					Product Code
	Under Armour Dia.	Overall Dia.	ISO Entry Thread		Approx length from shoulder	Hexagone Size
	A-Max. mm	B Max. mm	Dia D mm	Length E mm	F mm	G mm	H mm
16 S	3.50	7.00	M16	10.00	20.00	21.00	24.00	HA2 – 16 S
16 L	4.50	8.50	M16	10.00	22.00	21.00	24.00	HA2 – 16 L
20 S	8.00	11.50	M20	10.00	24.00	22.00	24.00	HA2 – 20 S
20 L	11.00	14.00	M20	10.00	24.00	24.00	26.00	HA2 – 20 L
25 S	14.00	17.50	M25	10.00	25.00	27.00	30.00	HA2 – 25 S
25 L	17.50	20.00	M25	13.00	26.00	30.00	33.00	HA2 – 25 L
32 S	20.00	23.00	M32	13.00	28.00	36.00	40.00	HA2 – 32 S
32 L	23.00	26.00	M32	14.00	28.00	36.00	40.00	HA2 – 32 L
40 S	26.00	29.00	M40	15.00	31.00	44.00	49.00	HA2 – 40 S
40 L	30.00	33.00	M40	15.00	31.00	46.00	50.00	HA2 – 40 L
50 S	33.00	40.00	M50	15.00	33.00	55.00	61.00	HA2 – 50 S
50 L	38.00	44.00	M50	15.00	33.00	58.00	64.00	HA2 – 50 L
63 S	44.00	50.00	M63	15.00	35.00	67.00	74.00	HA2 – 63 S
63 L	50.00	55.00	M63	15.00	35.00	69.00	76.00	HA2 – 63 L
75 S	56.50	62.00	M75	15.00	35.00	78.00	87.00	HA2 – 75 S
75 L	62.00	65.00	M75	15.00	35.00	81.00	90.00	HA2 – 75 L
90 S	68.00	75.00	M90	20.00	50.00	100.00	112.00	HA2 – 90 S
90 L	68.00	78.00	M90	20.00	50.00	100.00	112.00	HA2 – 90 L
100 L	78.00	89.00	M100	22.00	50.00	112.00	125.00	HA2 – 100 L

TECHNICAL DATA

Material	:	Brass as per IS 319
Plating	:	Nickel Standard
Entry Threads	:	Metric / PG
Rubber Seals (self-extinguishing)	:	Polyamide 6 insert Neoprene seal Neoprene O ring Continuous Operating Temperature: -20 to 100° C
Chemical resistance	:	Resistant to normal organic solvents, minerals, animal & vegetable oils and fats, petrol.
Threading	:	According to IEC 423, IEC 423A, and EN 60423
Ingress Protection	:	IP66
Series	:	HIP 68

APPLICATION :

The perfect Gland for unarmoured PVC, XLPE, and other synthetic cables.

DESIGN FEATURES :

This Metal Gland is a unique product that is very different fr5om traditional metal glands.

• It provides superior strain relief.
• Incorporates a unique ‘camera shutter’ principle that protects the cable.
• The cable fully insulated by a plastic insert.

Mounting Thread		Min.	Max.	Width	Product Code
A Dia. (mm)	B Leng (mm)	Cable Dia. (mm)	Cable Dia. (mm)	A/F (mm)
12.0	5.0	3.0	6.0	14.0	HIP68 – 12M
16.0	5.0	5.0	10.0	17.0	HIP68 – 16M
20.0	6.0	8.0	13.0	22.0	HIP68 – 20M
25.0	7.0	11.0	17.0	27.0	HIP68 – 25M
32.0	8.0	15.0	21.0	34.0	HIP68 – 32M
40.0	8.0	19.0	28.0	43.0	HIP68 – 40M
50.0	9.0	26.0	35.0	55.0	HIP68 – 50M
63.0	10.0	32.0	42.0	65.0	HIP68 – 63M
7.0	6.0	2.0	2.0	14.0	HIP86 – 7PG
9.0	6.0	4.0	8.0	17.0	HIP68 – 9PG
11.0	6.0	5.0	10.0	20.0	HIP68 – 11PG
13.5	7.0	6.0	12.0	22.0	HIP68 – 13.5PG
16.0	7.0	9.0	14.0	24.0	HIP68 – 16PG
21.0	8.0	12.0	17.0	30.0	HIP68 – 21PG
29.0	8.0	18.0	25.0	26.0	HIP68 – 29PG
36.0	16.0	22.0	32.0	50.0	HIP68 – 36PG
42.0	16.0	30.0	38.0	58.0	HIP68 – 42PG
48.0	16.0	32.0	42.0	34.0	HIP68 – 48PG

APPLICATION:
For use with all types of SWA Extruded bedding cable where it is essential to produce IP 66 seal on to the outer sheath and also produce an IP 66 or explosion proof seal on inner sheath. It provides seals to both inner sheath and outer sheath of the cable.

DESIGNFEATURES:

2 part armour/ Earth Lock, Knurled Armour Lock produces a low resistance earth clip, inner and outer
Displacement seal, Rated at IP 66 in conjunction with entry thread seal.
Also available in CIEL (Cast Internal Earth Lug), for orders add”C”.

S I Z E	Cable Dimensions Accommodate				Gland Dimensions				Product Code
	Under Armour Dia .A Max. mm	Overall Dia .B Max. mm	I S O E n t r y   T h r  e a d D i a       L e n g t h		Approx length from shoulder	Hexagon Size Across       Across        Flat         Corners
			D mm	E m m		G mm		H mm
					F mm
1 6 S	8.00	11.00 .00	M16	10.00	45.00	20.00	22.00		HE1W – 16S
1 6 L	9.00	13.50	Ml6	10.00	45.00	22.00	24.00		HE1W–16L
2 0 s	12.00	15.00	M20	10.50	45.00	22.00	24.00		HE1W–20S
2 0 L	14.00	20.00	M20	10.50	45.00	27.00	30.00		HE1W–20L
2 5 s	18.50	23.00	M25	10.50	50.00	31.50	35.50		HE1W–25S
2 5 L	20.40	27.00	M25	10.50	50.00	35.00	38.50		HE1W–25L
3 2 s	26.50	32.00	M32	13.00	60.00	41.00	46.00		HE1W–32S
3 2  L	26.50	32.00	M32	13.00	60.00	41.00	46.00		HE1W–32L
4 0 s	31.00	36.50	M40	15.00	60.00	45.50	51.00		HE1W–40S
4 0 L	34.00	41.50	M40	15.00	60.00	50.00	56.00		HE1W–40L
5 0 s	40.00	45.00	M50	15.00	65.00	57.50	64.00		HE1W–50S
5 0 L	44.00	53.00	M50	15.00	65.00	62.00	68.00		HElW–50L
6 3 s	51.00	60.00	M63	15.00	65.00	70.00	79.00		HE1W–63S
6 3 L	55.50	66.00	M63	15.00	65.00	78.50	86.00		HE1W–63L
7 5 s	62.00	70.00	M75	15.00	75.00	84.50	95.00		HE1W–75S
7 5 L	67.50	77.00	M75	15.00	75.00	92.00	102.50		HE1W–75L
9 0 s	78.00	94.00	M90	18.00	90.00	104.00	115.00		HE1W–90S
9 0 L	80.00	96.00	M90	18.00	90.00	112.00	125.00		HE1W–90L

KIT PACKING

16/20-32 inclusive	40-90 inclusive
2-Brass glands 2-Black PVC shrouds 2-Galv. steel locknuts 2-Brass earthing tags	1-Brass gland 1-Black PVC shrouds 1-Galv. steel locknuts 1-Brass earthing tags

TECHNICAL DATA :

Material

:

High Grade Poly Vinyl Chloride (PVC)

 

FEATURES :

• Provides additional protection and enhances IP rating of the glands.
• Effective solution to weather and corrosion protection of cable glands.
• Available in same gland size, compatible to each size of the cable glands.
• The arrow end of the sleeve is readily cut with a knife, enabling it to be slipped over a wide range of cable diameters and assists ease of installation.

TECHNICAL DATA :

Material

:

Low smoke Poly Vinyl Chloride.

 

FEATURES :

• Manufactured from PVC with Low Smoke & Fume properties.
• Available in dark grey color only.

TECHNICAL DATA :

Material

:

Brass, Aluminium & Galvanized Steel.

 

FEATURES :

• Used in fastening glands to the gland plate.
• Available in Metric, Imperial, NPT, BSPT, BSP & PG threads

TECHNICAL DATA :

Material

:

Aluminium Alloy

• BWA Al.Cable Glands

 

APPLICATION :

For dry and indoor use with all types of extruded bending cables and are used for aluminium armoured termination.

Sizes

:

M20 to M63

• CWA Al. Cable Glands

 

APPLICATION :

For indoor/outdoor use with all types of extruded bending cable and are used for aluminum armoured termination.

Sizes

:

M20 to M63

TECHNICAL DATA :

Material

:

Brass, Aluminum or Copper

 

FEATURES :

• Install between the glands entry and equipment.
• Available in various shapes and sizes.
• Ensures earth continuity between the electrical equipment & the gland.
• Can be coated or plated as per Customer Specification

TECHNICAL DATA :

Material	:	Brass
Finish	:	Nickel PlatedNickel Plated

 

APPLICATION :

Outdoor or indoor for use with all types of braided or unarmoured marine electrical cable fitting.

Sizes

:

3/8″ to 3″.

Pipe Thread A	Gland ID in mm	Rubber ID C	Locknut OD in mm D	Locknut OD in mm L	Total Length	Product Code
PF 3/8″	10	8	28	22	38	HCG-10
PF 1/2″	15	10	31.5	28	42	HCG-15
PF 3/4″	20	13	37	33.5	46	HCG-20
PF 1″	25	15	45	42	52	HCG-25
PF 1 1/4″	30	24	46	49.5	57	HCG-30
PF 1 1/2″	40	30	63	55	65	HCG-35
PF 1 1/2″	40	34	63	55	65	HCG-40
PF 2″	45	38	77	69	73	HCG-45
PF 2″	50	44	77	69	73	HCG-50
PF 2 1/2″	55	48	96	85	83	HCG-55
PF 2 1/2″	60	54	96	85	83	HCG-60
PF 3″	65	60	112	100	95	HCG-65
PF 3″	70	64	112	100	95	HCG-70